Stainless Steel NEMA 4X Arm Mount

Description

The HIS Stainless Steel Arm Mount provides an extremely solid workstation platform, ideally suited for industrial environments. The Stainless Steel Arm can be used with HIS Universal Mount Monitors when a full NEMA 4X anti-corrosive workstation is needed. This mount was designed as a rugged industrial-grade solution available for the same price as many office-grade articulating mounts.

With three pivoting joints, the Stainless Steel Arm can extend from a compact 7.5" (10.0" with 19" monitor) to a full 26.7" (28.8" with 19" monitor). The pivoting yoke allows the display to tilt through a full 60 degrees (up/down 30 degrees). The mount is made with heavy-gauge 304 Stainless Steel and is chemically passivated to ensure corrosion resistance.

Friction joints allow the monitor to be easily positioned with one hand, while knob tilt locks and "low bounce" design provide a stable platform for use with HIS industrial keyboards.

Features

• Rugged construction using high-grade, heavy-gauge 304 Stainless Steel
• Chemically passivated for corrosion resistance
• Rated at up to 100 lbs.
• "Low Bounce" design suitable for use with HIS integrated industrial keyboards
• Friction joints allow easy repositioning
• Knobs lock monitor tilt when necessary

Specifications

• Extends to 26.7" (678 mm) (28.8" with 19" monitor)
• Folds into 7.5" (189.7 mm) of space (10.0" (253.8 mm) with 19" monitor)
• Display tilts +/- 30 degrees (yoke can be reversed allowing 45 degrees tilt up, and 15 degrees down)
• Mounting pattern: 2-1/8" (54.0 mm) wide x 7.0" (177.7 mm) high
• Mounting bolts: four 5/16” diameter screws or bolts (not included)